ashlogo.jpg (8831 bytes)

Blast Chillers and Freezers

crr-csr1.jpg (20416 bytes)

crr-csr2f.jpg (10894 bytes)

CRR 30-15 A

CRR-CSR 2F

 

crr-csr6.jpg (27744 bytes)

CRR-CSR 6

HIGH PRODUCTIVITY PRODUCTIVITY COLD
Blast Chilling

Capacities from 36 to 480 Kg from +63º c to +10º c temerature within 110 minutes: 9 roll-in blast chiller models ,either with or without integrated refrigeration unit.

Blast Freezing

Capacities from 25 to 480 Kg, from +63º c to -18º c core temperature within 4 1/2 hours: 9 roll-in blast freezer models, which can also be used for chilling up to 660 Kg.

Blast Chilling -Blast freezing

This range of ROSIERES Grandes cluisines roll-in blast chillers can accommodate from one to six 1/1 gastrostandard racks or from one to four 600x400 mm pastry racks ,as well as the ROSIERES Grandes cuisines oven trolleys and most of the oven trolleys available on the market.

4round.jpg (11813 bytes)

The roll-in units are delivered dismantle ready to assembling.

All of the roll-in units, exept for CRR/CSR0.5, CRR/CSR  65c and CRR/CSR 1 which are always delivered fully assembled and with a floor, are shipped part-assembled.

In order to guarantee the quality and reliability of the controls, all of the refrigeration unit elements ,such as evaporator and fans ,are ready fitted: the electrical box is connected and the control system in place.

The assembly is pre-tested ,especially for leaks in the refrigeration circuit. All that needs to be done is to assemble the other panels around the refrigeration unit in line with the assembly drawing supplied .In the version with floor ,these models (except the CRR/CSR 6S)are available fully assembled upon request.

Profile | Products | ReachUs | Home